BRAIN TOUCH电子控制盒

Touch Screen display with VGA 640x480 pixel colour
触摸屏显示器，VGA 640x480彩色像素

Software very easy and intuitive 
软件非常便捷和直观

2 USB port: the first for saving programms and loading  logos with USB key,  the second to be use to connect an external keyboard.
USB端口：第一个用于保存程序和用USB密钥加载入logo，第二个用于连接外部键盘。

Auto failure diagnostics with alarm message displayed 
自动故障诊断，显示报警消息

Predisposition for all  western language and cyrillic  
可打标所有西方语言和西里尔文

Automatic saving of the programms in SD card, with the possibility to divide in working folders
自动将程序保存在SD卡中，可以在工作文件夹中进行分割

Automatic saving of the programms in SD card, with the possibility to divide in working folders
自动将程序保存在SD卡中，可以在工作文件夹中进行分割

Logic of programming PLC for implementation to robotic  cells and automation
编程PLC的逻辑用于实现到机器人单元和自动化

RS232, RS485, TCP/IP ports for communications with PC, PLC and directly with bar code readers. Digital I/O for automatic signals for automatic START, STOP, PAUSE, DONE, ON/OFF LINE and automatic loading of 256 different programs
RS232，RS485，TCP / IP端口，用于与PC，PLC通信，直接带有条形码读取器。数字 I/O 用于自动启动，停止，暂停，完成，开 / 关线和自动加载256个不同程序。

Ethernet TCP-IP for connection with the company wire and for remote support
以太网TCP-IP，用于连接公司电线和提供远程支持。

MOD BUS  Interfacing 总线协议接口

PROFIBUS, CANopen, DeviceNet, PROFINET, MODBUS TCP,ETHERNET / IP MODEBUS TCP
现场总线标准，高层通信协议，DeviceNet通信网络，PROFINET以太网协议，TCP总线协议，以太网/ IP 总线协议TCP

BRAIN EVO3电子控制盒

Membrane keyboard and LCD back-lighted display with 14 rows Software very easy and intuitive
膜键盘和LCD背光展示14列键盘，非常简洁直观

Expandable memory up to 8Gb
可扩展型内存高达8Gb.

USB key reader to upload and to save programms and logos
USB密钥读取器上传和保存程序和logo

Auto failure diagnostics with alarm message displayed 
自动故障诊断，显示报警消息

Predisposition for all  western language and cyrillic
可打标所有西方语言和西里尔文

Automatic saving of the programms in SD card, with the possibility to divide in working folders
自动将程序保存在SD卡中，可以在工作文件夹中进行分割

Logic of programming PLC for  implementation to robotic  cells and automation
编程PLC的逻辑用于实现到机器人单元和自动化

RS232, RS485, TCP/IP ports for communications with PC, PLC and directly with bar code readers. Digital I/O for automatic signals for automatic START, STOP, PAUSE, DONE, ON/OFF LINE and automatic loading of 256 different programs
S232，RS485，TCP / IP端口，用于与PC，PLC通信，直接带有条形码读取器。数字 I/O 用于自动启动，停止，暂停，完成，开 / 关线和自动加载256个不同程序。

Ethernet TCP-IP for connection with the company wire and for remote support
以太网TCP-IP，用于连接公司电线和提供远程支持。