Scratch
-
-
G系列划刻打标机
- 生产厂商及品牌名称
- 设备型号及加工参数
- 参考价格范围
采用金刚石或硬质合金的针尖划线打标,其可打标的工件硬度高达80Hrc。用划线打标的最大优势是减少大量的噪音。
Scribe marking with diamond or tungsten carbide tip indicated for hard pieces marking (up to 80Hrc). The great advantage of using the Scribe marking technology is the significant reduction in noise.
采用金刚石或硬质合金的针尖划线打标,其可打标的工件硬度高达80Hrc。用划线打标的最大优势是减少大量的噪音。
G1 | G2 | G3 | |
MARKING AREA 打标面积 | 40X60 MM | 100X100 MM | 180X100 MM |
TIP DRIVE TECHNOLOGY 尖端驱动技术 | PNEUMATIC ON DIAMOND; 钻石上气动打标 PNEUMATIC ON TUNGSTEN CARBIDE 碳化铁上气动打标 | ||
SUPERFICIAL HARDNESS OF MATERIALS 材料表面硬度 | UP TO 80 HRC 最高可达80 HRC | ||
MARKING HEAD WEIGHT 打标头重量 | 5KG | 7KG | 9KG |
- 上一条没有了
- 下一条5W-6电子测量轮低速车测试